GIT_SILENT Sync po/docbooks with svn

[dolphin.git] / doc / index.docbook

diff --git a/doc/index.docbook b/doc/index.docbook
index 3495ee9bcfe711d218a2f8a04ef972756d60a0b4..43ee0db44d3630162cd380ab90345d3bfe97f0fb 100644 (file)
--- a/doc/index.docbook
+++ b/doc/index.docbook
@@ -70,8 +70,8 @@
 
 <legalnotice>&FDLNotice;</legalnotice>
 
 
 <legalnotice>&FDLNotice;</legalnotice>
 

-<date>2019-02-17</date>
-<releaseinfo>Applications 19.04</releaseinfo>
+<date>2022-01-17</date>
+<releaseinfo>KDE Gear 22.04</releaseinfo>

 
 <abstract>
 <para>
 
 <abstract>
 <para>


@@ -189,7 +189,7 @@ The <link linkend="places-panel"><guilabel>Places</guilabel> panel</link>, which
 provides quick access to bookmarked locations and disks or other media.
 </para>
 <para>If desktop search and file indexing are enabled in the <guilabel>Desktop Search</guilabel> 
 provides quick access to bookmarked locations and disks or other media.
 </para>
 <para>If desktop search and file indexing are enabled in the <guilabel>Desktop Search</guilabel> 

-module in the &systemsettings; the panel provides <guilabel>Recently Saved</guilabel> 
+module in the &systemsettings; the panel provides <guilabel>Recent</guilabel>

 items and allows you to search for <guilabel>Documents</guilabel>, <guilabel>Images</guilabel>,
 <guilabel>Audio Files</guilabel> and <guilabel>Video</guilabel>.
 </para></listitem>
 items and allows you to search for <guilabel>Documents</guilabel>, <guilabel>Images</guilabel>,
 <guilabel>Audio Files</guilabel> and <guilabel>Video</guilabel>.
 </para></listitem>


@@ -238,9 +238,9 @@ can be accessed or manipulated in different ways:
 
 <listitem><para>
 A file or folder can be opened by clicking it with the &LMB; (or
 
 <listitem><para>
 A file or folder can be opened by clicking it with the &LMB; (or

-double-clicking, if <guilabel>Double-click to open files and folders</guilabel>
-is enabled in the &systemsettings; in the <menuchoice><guimenu>Input Devices</guimenu>
-<guimenuitem>Mouse</guimenuitem></menuchoice> module.
+double-clicking, if <guilabel>Open by double-clicking instead</guilabel>
+is enabled in the &systemsettings; in the <menuchoice><guimenu>Workspace</guimenu>
+<guimenuitem>General Behavior</guimenuitem></menuchoice> module).

 </para></listitem>
 
 <listitem><para>
 </para></listitem>
 
 <listitem><para>


@@ -312,7 +312,7 @@ The buttons in the toolbar which control the appearance of the view.
 All the settings discussed below and other options concerning, &eg; the
 sorting of the files in the current folder, can also be modified in the
 <guimenu>View</guimenu> menu and in the
 All the settings discussed below and other options concerning, &eg; the
 sorting of the files in the current folder, can also be modified in the
 <guimenu>View</guimenu> menu and in the

-<link linkend="view-properties-dialog">View Properties dialog</link>. By
+<link linkend="view-properties-dialog">View Display Style dialog</link>. By

 default, these settings are remembered for each folder separately. This
 behavior can be changed in the
 <link linkend="preferences-dialog-general"><quote>General</quote></link> section of the settings.
 default, these settings are remembered for each folder separately. This
 behavior can be changed in the
 <link linkend="preferences-dialog-general"><quote>General</quote></link> section of the settings.


@@ -349,9 +349,10 @@ as a detailed list which contains the name, size and last modification time of
 each item. Additional columns can be added by clicking a column header with the
 &RMB;.
 </para>
 each item. Additional columns can be added by clicking a column header with the
 &RMB;.
 </para>

-<para>In the context menu of the header line you can choose between custom or automatic 
-column width. Automatic width adjusts the width of all columns once to display the longest 
-item in the column completely, except for the <guilabel>Name</guilabel> column where 
+<para>In the context menu of the header line, you can add or remove side padding
+by checking or unchecking the respective menu item and choose between a custom
+or automatic column width. Automatic width adjusts the width of all columns once to display the
+longest item in the column completely, except for the <guilabel>Name</guilabel> column where 

 the extension is replaced by <quote>...</quote> 
 </para>
 <para>The order of columns can be changed by drag and drop of column headers, except for
 the extension is replaced by <quote>...</quote> 
 </para>
 <para>The order of columns can be changed by drag and drop of column headers, except for


@@ -610,11 +611,11 @@ programs built into &kde; which add support for many different protocols to
 used to manage files and folders on a remote host that is accessible 
 via <acronym>SSH</acronym>. To do this you would type <userinput>fish://username@remotehost</userinput> 
 into the location bar. Similar remote file management can be done on 
 used to manage files and folders on a remote host that is accessible 
 via <acronym>SSH</acronym>. To do this you would type <userinput>fish://username@remotehost</userinput> 
 into the location bar. Similar remote file management can be done on 

-remote hosts accessible via the &FTP;, NFS, SFTP, SMB (CIFS) or webdav protocols.</para>
+remote hosts accessible via the &FTP;, &NFS;, SFTP, &SMB; (&CIFS;) or webdav protocols.</para>

 
 

-<para>It is also possible to use the kioslaves drop down list to access 
+<para>It is also possible to use the kioslaves drop down box to access 

 &systemsettings;, fonts, trash, other programs and devices attached to your computer. 
 &systemsettings;, fonts, trash, other programs and devices attached to your computer. 

-See the drop down list for the full list of capabilities available from kioslaves on your system.
+See the drop down box for the full list of capabilities available from kioslaves on your system.

 </para>
 <screenshot>
 <screeninfo>Screenshot of the list of kioslaves</screeninfo>
 </para>
 <screenshot>
 <screeninfo>Screenshot of the list of kioslaves</screeninfo>


@@ -681,7 +682,7 @@ the path starting with the current places entry.
 
 <para>
 &dolphin; allows a number of panels to be placed next to the view. These can
 
 <para>
 &dolphin; allows a number of panels to be placed next to the view. These can

-be enabled in <menuchoice><guimenu>View</guimenu><guisubmenu>Panels</guisubmenu></menuchoice>.
+be enabled in <menuchoice><guimenu>View</guimenu><guisubmenu>Show Panels</guisubmenu></menuchoice>.

 By unlocking the panels and clicking and dragging a panel title, the panel can be moved 
 to a different position, even outside the window.
 </para>
 By unlocking the panels and clicking and dragging a panel title, the panel can be moved 
 to a different position, even outside the window.
 </para>


@@ -690,7 +691,7 @@ to a different position, even outside the window.
 <title>Places</title>
 <!--FIXME difference between places panel in dolphin + kde filedialog + konqueror:
 context menu Icon Size? No different entries ?-->
 <title>Places</title>
 <!--FIXME difference between places panel in dolphin + kde filedialog + konqueror:
 context menu Icon Size? No different entries ?-->

-<!--Four groups: Places = Folders, Devices, with Baloo Recently Saved and Search For -->
+<!--Four groups: Places = Folders, Devices, Recent and with Baloo Search For -->

 <para>
 The <guilabel>Places</guilabel> panel is located at the left of the window by
 default. The <guilabel>Places</guilabel> panel shows any locations you have
 <para>
 The <guilabel>Places</guilabel> panel is located at the left of the window by
 default. The <guilabel>Places</guilabel> panel shows any locations you have


@@ -773,6 +774,33 @@ current folder, &RMB; click in the work space and click
 <menuchoice><guimenuitem>Add to Places</guimenuitem></menuchoice> in the context menu.
 </para>
 
 <menuchoice><guimenuitem>Add to Places</guimenuitem></menuchoice> in the context menu.
 </para>
 

+<note>
+    <para>
+        The corresponding menu item visibility can be toggled via the
+        <link linkend="preferences-dialog-context-menu">&dolphin; context menu settings</link>.
+    </para>
+</note>
+
+</sect2>
+
+<sect2 id="filter-files">
+<title>Filtering Files</title>
+
+<para>
+&dolphin; is capable of filtering files, &ie; showing only those items in the
+view whose name contains a given text. For example, if you wish to show
+only the <acronym>MP3</acronym> files within a folder, you could filter for <quote>.mp3</quote>.
+This would then filter out all files whose name does not contain <quote>.mp3</quote>.
+</para>
+
+<para>
+To filter files, first enable the filter bar, either by pressing <keycombo action="simul">&Ctrl;<keycap>I</keycap></keycombo>
+or via the menu: <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Filter...</guimenuitem> </menuchoice>.
+You can then enter the text to be filtered for in the filter bar. The filter bar can
+be disabled either by pressing &Esc;, or with a &LMB; click on the 
+<guiicon>Hide Filter Bar</guiicon> icon.
+</para>
+

 </sect2>
 
 <sect2 id="finding-searching-in-file">
 </sect2>
 
 <sect2 id="finding-searching-in-file">


@@ -789,7 +817,7 @@ Start to type into the find input box and the search starts immediately.
 <screeninfo>Search files and for content in files</screeninfo>
 <mediaobject>
 <imageobject>
 <screeninfo>Search files and for content in files</screeninfo>
 <mediaobject>
 <imageobject>

-<imagedata fileref="nepomuk-search.png" format="PNG"/>
+<imagedata fileref="baloo-search.png" format="PNG"/>

 </imageobject>
 <textobject>
 <phrase>Search files and for content in files</phrase>
 </imageobject>
 <textobject>
 <phrase>Search files and for content in files</phrase>


@@ -811,7 +839,7 @@ starts the search from the user's <replaceable>Home</replaceable> folder.</para>
 <screeninfo>Search with More Options</screeninfo>
 <mediaobject>
 <imageobject>
 <screeninfo>Search with More Options</screeninfo>
 <mediaobject>
 <imageobject>

-<imagedata fileref="nepomuk-search-more-options.png" format="PNG"/>
+<imagedata fileref="baloo-search-more-options.png" format="PNG"/>

 </imageobject>
 <textobject>
 <phrase>Search with More Options</phrase>
 </imageobject>
 <textobject>
 <phrase>Search with More Options</phrase>


@@ -826,7 +854,10 @@ bar. This provides a very comfortable way for
 the user to shrink the number of search results.</para>
 <para>To start a search select one or more file types (<guilabel>Documents</guilabel>, 
 <guilabel>Audio</guilabel>, <guilabel>Video</guilabel>, <guilabel>Images</guilabel>),
 the user to shrink the number of search results.</para>
 <para>To start a search select one or more file types (<guilabel>Documents</guilabel>, 
 <guilabel>Audio</guilabel>, <guilabel>Video</guilabel>, <guilabel>Images</guilabel>),

-  a time period and rating<!--FIXME readd when again implemented: and tag, if you have defined any.--></para>
+a time period, rating, and tag, if you have defined any via
+<userinput>tag:<replaceable>foo</replaceable></userinput> in the input box.</para>
+ 
+ <para>It is possible to clear selection using the <guibutton>Clear Selection</guibutton> button.</para>

 
 <para>Alternatively you can use these options in the <guilabel>Places</guilabel> panel 
 together with the <guilabel>Filter</guilabel> bar to find files using Baloo or limit 
 
 <para>Alternatively you can use these options in the <guilabel>Places</guilabel> panel 
 together with the <guilabel>Filter</guilabel> bar to find files using Baloo or limit 


@@ -835,11 +866,10 @@ the search to files matching the filter expression.</para>
 <para>Use the Save icon to save a search to the <guilabel>Search For</guilabel>
 section in the <guilabel>Places</guilabel> panel to quickly access it again in the future.
 </para>
 <para>Use the Save icon to save a search to the <guilabel>Search For</guilabel>
 section in the <guilabel>Places</guilabel> panel to quickly access it again in the future.
 </para>

-<!--FIXME 16.12
-https://git.reviewboard.kde.org/r/123883/
-Add prototype of a "More search tools..." button
--->

 
 

+<para>
+Use the <guilabel>More Search Tools</guilabel> drop-down list to select other search tools than Baloo.
+</para>

 </sect2>
 
 <sect2 id="mounting-storage-media">
 </sect2>
 
 <sect2 id="mounting-storage-media">


@@ -912,26 +942,6 @@ via the Tools menu: <menuchoice> <guimenu>Tools</guimenu> <guimenuitem>Compare F
 
 </sect2>
 
 
 </sect2>
 

-<sect2 id="filter-files">
-<title>Filtering Files</title>
-
-<para>
-&dolphin; is capable of filtering files, &ie; showing only those items in the
-view whose name contains a given text. For example, if you wish to show
-only the <acronym>MP3</acronym> files within a folder, you could filter for <quote>.mp3</quote>.
-This would then filter out all files whose name does not contain <quote>.mp3</quote>.
-</para>
-
-<para>
-To filter files, first enable the filter bar, either by pressing <keycombo action="simul">&Ctrl;<keycap>I</keycap></keycombo>
-or via the menu: <menuchoice> <guimenu>Tools</guimenu> <guimenuitem>Show Filter Bar</guimenuitem> </menuchoice>.
-You can then enter the text to be filtered for in the filter bar. The filter bar can
-be disabled either by pressing &Esc;, or with a &LMB; click on the 
-<guiicon>Hide Filter Bar</guiicon> icon.
-</para>
-
-</sect2>
-

 </sect1>
 
 </chapter>
 </sect1>
 
 </chapter>


@@ -951,11 +961,11 @@ using the <link linkend="preferences-dialog">Preferences Dialog</link>.
 
 <listitem><para>
 Settings which determine how the contents of a folder are displayed in &dolphin;.
 
 <listitem><para>
 Settings which determine how the contents of a folder are displayed in &dolphin;.

-These settings are called <link linkend="view-properties">View Properties</link>
+These settings are called <link linkend="view-properties">View Display Styles</link>

 and can be controlled with toolbar buttons, via the <guimenu>View</guimenu> menu,
 and can be controlled with toolbar buttons, via the <guimenu>View</guimenu> menu,

-and with the <link linkend="view-properties-dialog">View Properties Dialog</link>.
-In the default configuration, the view properties are remembered for each folder,
-but &dolphin; can also be configured to use common view properties for all folders
+and with the <link linkend="view-properties-dialog">View Display Style dialog</link>.
+In the default configuration, all folders use the same display style,
+but &dolphin; can also be configured to remember each folder's display style separately

 in the <link linkend="preferences-dialog-general-behavior"><quote>General</quote>
 section of the settings</link>.
 </para></listitem>
 in the <link linkend="preferences-dialog-general-behavior"><quote>General</quote>
 section of the settings</link>.
 </para></listitem>


@@ -1008,9 +1018,9 @@ tab bar at the top.
 <itemizedlist>
 
 <listitem><para>
 <itemizedlist>
 
 <listitem><para>

-In the <guilabel>View</guilabel> section, you can configure whether the
-<link linkend="view-properties"> view properties</link> are stored for each
-folder or if common view properties are to be used for all folders.
+In the <guilabel>View</guilabel> section, you can configure whether the same
+<link linkend="view-properties">view display style</link> is shared among all folders
+or folders remember their own individual view display styles.

 </para></listitem>
 
 <listitem><para>
 </para></listitem>
 
 <listitem><para>


@@ -1066,7 +1076,7 @@ to close the inactive pane when you are turning off the split view mode, &eg; pr
 
 <para>
 In this tab, you can configure for which file types previews are shown.
 
 <para>
 In this tab, you can configure for which file types previews are shown.

-Moreover, the maximum size of remote files for which previews are generated can be chosen.
+Moreover, the maximum size of local and remote files for which previews are generated can be chosen.

 </para>
 <para>
 If previews are enabled for folders, previews of some files in the folder will
 </para>
 <para>
 If previews are enabled for folders, previews of some files in the folder will


@@ -1078,11 +1088,14 @@ be shown inside a folder's icon.
 <title>Confirmations Tab</title>
 <para>
 In the ask for confirmation section, you can enable warning dialogs that
 <title>Confirmations Tab</title>
 <para>
 In the ask for confirmation section, you can enable warning dialogs that

-are shown before potentially harmful actions .
+are shown before potentially harmful actions.
+</para>
+<para>
+It is also possible to choose the default action <guilabel>When opening an executable file</guilabel>. There are three options, namely <guimenuitem>Always ask</guimenuitem>, <guimenuitem>Open in application</guimenuitem>, and <guimenuitem>Run script</guimenuitem>.

 </para>
 <warning><para>The confirmation settings for <guilabel>Moving files or folders to trash</guilabel> and
 <guilabel>Deleting files or folders</guilabel> affect file operations in &dolphin;, &konqueror;, 
 </para>
 <warning><para>The confirmation settings for <guilabel>Moving files or folders to trash</guilabel> and
 <guilabel>Deleting files or folders</guilabel> affect file operations in &dolphin;, &konqueror;, 

-<application>Gwenview</application> and all &kde; applications using the default &kde; file dialog, 
+&gwenview; and all &kde; applications using the default &kde; file dialog, 

 whereas <guilabel>Closing Dolphin windows
 with multiple tabs</guilabel> is a &dolphin; specific setting.</para></warning>
 </sect3>
 whereas <guilabel>Closing Dolphin windows
 with multiple tabs</guilabel> is a &dolphin; specific setting.</para></warning>
 </sect3>


@@ -1097,11 +1110,15 @@ the status bar is wide enough:
 <itemizedlist>
 
 <listitem><para>
 <itemizedlist>
 
 <listitem><para>

-A <guilabel>zoom slider</guilabel> which can be used to change the icon size quickly.
+The <guilabel>Show status bar</guilabel> item can be used for toggling status bar visibility.

 </para></listitem>
 
 <listitem><para>
 </para></listitem>
 
 <listitem><para>

-A bar that shows how much space is free on the current drive.
+The <guilabel>Show zoom slider</guilabel> item allows switching visibility of the icon size widget.
+</para></listitem>
+
+<listitem><para>
+The <guilabel>Show space information</guilabel> item can be used to switch on and off a bar that shows how much space is free on the current drive.

 </para></listitem>
 
 </itemizedlist>
 </para></listitem>
 
 </itemizedlist>


@@ -1134,26 +1151,55 @@ This group contains settings which control the appearance of &dolphin; on startu
 <itemizedlist>
 
 <listitem><para>
 <itemizedlist>
 
 <listitem><para>

-The <guilabel>Start in</guilabel> folder is the folder which is opened on startup. The
-location of the folder can be entered directly or chosen in a dialog which can
+The <guilabel>Show on startup</guilabel> option allows choosing the folder which is opened on startup.
+</para>
+<para>
+    If the <guimenuitem>Folders, tabs, and window state from last time</guimenuitem> item is selected then
+</para>
+<itemizedlist>
+    <listitem>
+        <para>When launched from the &GUI; or CLI without any &URL;s, &dolphin; restores session</para>
+    </listitem>
+    <listitem>
+        <para>When rebooting with &dolphin; open, it restores session normally after the system comes back</para>
+    </listitem>
+    <listitem>
+        <para>When launched with &URL;s, &dolphin; window is opened showing those &URL;s instead of restoring session</para>
+    </listitem>
+    <listitem>
+        <para>When &dolphin; is already running and a new window is opened, that new window shows a single tab with the same &URL; as was visible in the previously-open &dolphin; instance</para>
+    </listitem>
+</itemizedlist>
+<para>
+The location of the folder can also be entered directly or chosen in a dialog which can

 be opened by clicking the button showing a <quote>folder</quote> icon. Moreover,
 the current location or the default location (which is the user's home folder)
 can be used as the startup folder by clicking the corresponding button.
 </para></listitem>
 
 <listitem><para>
 be opened by clicking the button showing a <quote>folder</quote> icon. Moreover,
 the current location or the default location (which is the user's home folder)
 can be used as the startup folder by clicking the corresponding button.
 </para></listitem>
 
 <listitem><para>

-<guilabel>Split view mode</guilabel> controls if the
+<guilabel>Begin in split view mode</guilabel> controls if the

 <link linkend="dolphin-view">&dolphin; view</link> is split on startup
 <link linkend="dolphin-view">&dolphin; view</link> is split on startup

-or not.
+or not for new windows.
+</para></listitem>
+
+<listitem><para>
+<guilabel>Show filter bar</guilabel> controls if the filter bar is shown on
+startup or not. See the <link linkend="filter-files">section on the filter bar</link>
+for details.

 </para></listitem>
 
 <listitem><para>
 </para></listitem>
 
 <listitem><para>

-<guilabel>Editable location bar</guilabel> controls if the location bar is in
+<guilabel>Make location bar editable</guilabel> controls if the location bar is in

 editable mode on startup. The bread crumb mode of the location bar is used
 otherwise. See the <link linkend="location-bar">section about the location bar</link>
 for details about the two modes.
 </para></listitem>
 
 editable mode on startup. The bread crumb mode of the location bar is used
 otherwise. See the <link linkend="location-bar">section about the location bar</link>
 for details about the two modes.
 </para></listitem>
 

+<listitem><para>
+<guilabel>Open new folders in tabs</guilabel> controls whether &dolphin; should open a new folder in a new tab of the current instance when called externally. If not enabled, the new folders will be opened in new instances of &dolphin;. By default this option is enabled.
+</para></listitem>
+

 <listitem><para>
 If <guilabel>Show full path inside location bar</guilabel> is enabled, the full
 path of the current location is shown in the bread crumb mode of the location bar.
 <listitem><para>
 If <guilabel>Show full path inside location bar</guilabel> is enabled, the full
 path of the current location is shown in the bread crumb mode of the location bar.


@@ -1161,16 +1207,11 @@ Otherwise, a shortened version of the path is shown if it begins with the path o
 one of the places in the <guilabel>Places</guilabel> panel.
 </para></listitem>
 
 one of the places in the <guilabel>Places</guilabel> panel.
 </para></listitem>
 

-<listitem><para>
-<guilabel>Show filter bar</guilabel> controls if the filter bar is shown on
-startup or not. See the <link linkend="filter-files">section on the filter bar</link>
-for details.
-</para></listitem>
-

 <listitem><para>
 <guilabel>Show full path in title bar</guilabel> makes it easy to distinguish
 between files or folders with the same name in different folders.
 </para></listitem>
 <listitem><para>
 <guilabel>Show full path in title bar</guilabel> makes it easy to distinguish
 between files or folders with the same name in different folders.
 </para></listitem>

+

 </itemizedlist>
 
 </para>
 </itemizedlist>
 
 </para>


@@ -1265,7 +1306,17 @@ the text of a file item.
 <guilabel>Expandable folders</guilabel> determines whether any folders that have subfolders
 are displayed in a tree view, where the sub items can be expanded by &LMB; clicking the
 <guiicon>&gt;</guiicon> icon and collapsed by clicking the <guiicon>v</guiicon> icon.
 <guilabel>Expandable folders</guilabel> determines whether any folders that have subfolders
 are displayed in a tree view, where the sub items can be expanded by &LMB; clicking the
 <guiicon>&gt;</guiicon> icon and collapsed by clicking the <guiicon>v</guiicon> icon.

-</para></listitem>
+</para>
+<para>
+<guilabel>Folder size</guilabel> allows defining the property to use for sorting folders by their size.
+It is possible to sort folders by number of items by choosing <guilabel>Show number of items</guilabel> or by the size of the contents by choosing <guilabel>Show size of contents</guilabel>.
+The recursion level can be limited, which can be useful to constrain unneeded iterations in deep folder structures or on slow file systems.
+It is also possible to disable displaying folder size by choosing <guilabel>Show no size</guilabel> (which might improve performance in rare cases, however impacts other features like sorting).
+</para>
+<para>
+The <guilabel>Date style</guilabel> option can be used to configure the mode to display dates in &dolphin;. It is possible to choose between <guilabel>Relative</guilabel> (&eg;, <quote>Yesterday, 3:00pm</quote>) or <guilabel>Absolute</guilabel> (&eg;, <quote>2020-12-23 15:00</quote>).
+</para>
+</listitem>

 </itemizedlist>
 </para>
 </sect3>
 </itemizedlist>
 </para>
 </sect3>


@@ -1296,8 +1347,8 @@ structure and in archives works.
 
 <listitem><para>
 The option to open items with a single or double mouse click is a system wide setting and can be
 
 <listitem><para>
 The option to open items with a single or double mouse click is a system wide setting and can be

-changed in the &systemsettings; in the <menuchoice><guimenu>Input Devices</guimenu>
-<guimenuitem>Mouse</guimenuitem></menuchoice> module.</para>
+changed in the &systemsettings; in the <menuchoice><guimenu>Workspace</guimenu>
+<guimenuitem>General Behavior</guimenuitem></menuchoice> module.</para>

 </listitem>
 
 <listitem><para>
 </listitem>
 
 <listitem><para>


@@ -1318,7 +1369,7 @@ several levels deeper in the folder hierarchy.
 
 </sect2>
 
 
 </sect2>
 

-<sect2 id="preferences-dialog-services">
+<sect2 id="preferences-dialog-context-menu">

 <title>Services</title>
 
 <para>
 <title>Services</title>
 
 <para>


@@ -1328,10 +1379,10 @@ appears when clicking a file or folder with the &RMB;.
 </para>
 
 <screenshot>
 </para>
 
 <screenshot>

-<screeninfo>Screenshot of the Services settings in &dolphin;'s preferences dialog</screeninfo>
+<screeninfo>Screenshot of the Services Menu settings in &dolphin;'s preferences dialog</screeninfo>

 <mediaobject>
 <imageobject>
 <mediaobject>
 <imageobject>

-<imagedata fileref="preferences-services.png" format="PNG"/>
+<imagedata fileref="preferences-context-menu.png" format="PNG"/>

 </imageobject>
 <textobject>
 <phrase>Services Settings.</phrase>
 </imageobject>
 <textobject>
 <phrase>Services Settings.</phrase>


@@ -1354,13 +1405,15 @@ and you have additional entries in the
 context menu like commit, update, add, remove &etc;
 </para>
 <para>
 context menu like commit, update, add, remove &etc;
 </para>
 <para>

-In the service list you can also choose if the <guimenuitem>Delete</guimenuitem>,
-<guimenuitem>Copy To</guimenuitem>, and <guimenuitem>Move To</guimenuitem>
+In the service list you can also choose if the <guimenuitem>Copy To</guimenuitem>,
+<guimenuitem>Move To</guimenuitem>, <guimenuitem>Add to Places</guimenuitem>,
+<guimenuitem>Sort By</guimenuitem>, <guimenuitem>View Mode</guimenuitem>,
+<guimenuitem>Open in New Tab</guimenuitem>, <guimenuitem>Open in New Window</guimenuitem>,
+<guimenuitem>Copy Location</guimenuitem>, and <guimenuitem>Duplicate Here</guimenuitem>

 commands are shown in the context menu.
 </para>
 <para>
 &dolphin; has to be restarted to activate the changes for some of these settings.
 commands are shown in the context menu.
 </para>
 <para>
 &dolphin; has to be restarted to activate the changes for some of these settings.

-<!--FIXME wrong for Copy To + Move To + Delete, what about the other items?-->

 </para>
 
 </sect2>
 </para>
 
 </sect2>


@@ -1402,10 +1455,41 @@ largest files can be deleted automatically.
 
 </sect2>
 
 
 </sect2>
 

+<sect2 id="preferences-user-feedback">
+<title>User Feedback</title>
+
+<para>
+This group contains settings which control your contributing information on the &dolphin; usage to its developers.
+
+<screenshot>
+<screeninfo>Screenshot of the User Feedback settings in &dolphin;'s preferences dialog</screeninfo>
+<mediaobject>
+<imageobject>
+<imagedata fileref="preferences-user-feedback.png" format="PNG"/>
+</imageobject>
+<textobject>
+<phrase>User Feedback Settings.</phrase>
+</textobject>
+<caption><para>User Feedback Settings in &dolphin;'s Preferences Dialog.</para></caption>
+</mediaobject>
+</screenshot>
+
+<itemizedlist>
+
+<listitem><para>
+You can contribute some feedback on &dolphin; if you wish. Use sliders to configure your level of participation.
+</para></listitem>
+
+</itemizedlist>
+
+</para>
+
+</sect2>
+

 </sect1>
 <!-- begin copy to konqueror filemanager.docbook -->
 <sect1 id="view-properties">
 </sect1>
 <!-- begin copy to konqueror filemanager.docbook -->
 <sect1 id="view-properties">

-<title>Folder View Properties</title>
+<title>Folder View Display Style</title>

 
 <para>
 The following settings control how the contents of a folder are displayed in the
 
 <para>
 The following settings control how the contents of a folder are displayed in the


@@ -1447,31 +1531,31 @@ What additional information (besides the name) is shown in the Icons or Details
 
 </itemizedlist>
 <para>
 
 </itemizedlist>
 <para>

-The view properties can be configured in the
+The view display style can be configured in the

 <menuchoice><guimenu>View</guimenu></menuchoice> menu, some (such as the view
 mode) can also be changed using toolbar buttons.
 </para>
 
 <sect2 id="view-properties-dialog">
 <menuchoice><guimenu>View</guimenu></menuchoice> menu, some (such as the view
 mode) can also be changed using toolbar buttons.
 </para>
 
 <sect2 id="view-properties-dialog">

-<title>The View Properties Dialog</title>
+<title>The View Display Style dialog</title>

 
 <para>
 
 <screenshot>
 
 <para>
 
 <screenshot>

-<screeninfo>Screenshot of the View Properties dialog</screeninfo>
+<screeninfo>Screenshot of the View Display Style dialog</screeninfo>

 <mediaobject>
 <imageobject>
 <imagedata fileref="viewproperties-dialog.png" format="PNG"/>
 </imageobject>
 <textobject>
 <mediaobject>
 <imageobject>
 <imagedata fileref="viewproperties-dialog.png" format="PNG"/>
 </imageobject>
 <textobject>

-<phrase>The View Properties dialog.</phrase>
+<phrase>The View Display Style dialog.</phrase>

 </textobject>
 </textobject>

-<caption><para>The View Properties Dialog.</para></caption>
+<caption><para>The View Display Style Dialog.</para></caption>

 </mediaobject>
 </screenshot>
 
 </mediaobject>
 </screenshot>
 

-The <guilabel>View Properties</guilabel> dialog can be used to quickly modify
-several view properties at once. This is done for the current folder, for the
+The <guilabel>View Display Style</guilabel> dialog can be used to quickly modify
+the view display styles for many folders at once. This is done for the current folder, for the

 current folder including all subfolders, or even for all folders, depending on
 the choice made in the <guilabel>Apply to</guilabel> section.
 </para>
 current folder including all subfolders, or even for all folders, depending on
 the choice made in the <guilabel>Apply to</guilabel> section.
 </para>


@@ -1511,6 +1595,11 @@ be accessed with toolbar buttons or with items in the menu of the
 folder.</action></para>
 <para>You will find an explanation of all available objects in &konqueror;'s handbook in the chapter
 <ulink url="help:/konqueror/making.html">Create New</ulink>.</para>
 folder.</action></para>
 <para>You will find an explanation of all available objects in &konqueror;'s handbook in the chapter
 <ulink url="help:/konqueror/making.html">Create New</ulink>.</para>

+<note>
+    <para>
+        It is possible to create your own <guisubmenu>Create New...</guisubmenu> submenu items. Use files from <ulink url="https://invent.kde.org/frameworks/kio/-/tree/master/src/new_file_templates">KIO source repository</ulink> as a reference and put the resulting <filename role="extension">.desktop</filename> file into the <filename role="directory">.local/share/templates</filename> in your home directory (the address can be determined using the <userinput>kf5-config --path templates</userinput> command in &konsole;), then restart &dolphin;.
+    </para>
+</note>

 </listitem>
 </varlistentry>
 
 </listitem>
 </varlistentry>
 


@@ -1604,6 +1693,17 @@ to the trash and cannot be restored.</action></para></listitem>
 </para></listitem>
 </varlistentry>
 
 </para></listitem>
 </varlistentry>
 

+<varlistentry>
+<term><menuchoice>
+<shortcut>
+<keycombo action="simul">&Ctrl;<keycap>D</keycap></keycombo>
+</shortcut>
+<guimenu>File</guimenu>
+<guimenuitem>Duplicate Here</guimenuitem>
+</menuchoice></term>
+<listitem><para><action>Creates duplicates of selected items appending <replaceable> copy</replaceable> to the end of their names.</action></para></listitem>
+</varlistentry>
+

 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <varlistentry>
 <term><menuchoice>
 <shortcut>


@@ -1687,6 +1787,42 @@ The name of this file has to be entered in a dialog.
 </action></para></listitem>
 </varlistentry>
 
 </action></para></listitem>
 </varlistentry>
 

+<varlistentry>
+<term><menuchoice>
+<shortcut>
+<keycombo action="simul">&Ctrl;<keycap>F5</keycap></keycombo>
+</shortcut>
+<guimenu>Edit</guimenu>
+<guimenuitem>Copy to inactive split view</guimenuitem>
+</menuchoice></term>
+<listitem><para><action>Copies the currently selected item(s) from the active split view to the inactive split view.</action></para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term><menuchoice>
+<shortcut>
+<keycombo action="simul">&Ctrl;<keycap>F6</keycap></keycombo>
+</shortcut>
+<guimenu>Edit</guimenu>
+<guimenuitem>Move to inactive split view</guimenuitem>
+</menuchoice></term>
+<listitem><para><action>Moves the currently selected item(s) from the active split view to the inactive split view.
+Is disabled if the current user does not have write permission on the selected item(s).</action></para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term><menuchoice>
+<shortcut>
+<keycombo action="simul">&Ctrl;<keycap>I</keycap></keycombo>
+</shortcut>
+<guimenu>Edit</guimenu>
+<guimenuitem>Filter...</guimenuitem>
+</menuchoice></term>
+<listitem><para><action>Enables and disables the <link linkend="filter-files">filter bar</link>.</action>
+You can also use the alternate shortcut <keycombo action="simul">&Shift;<keycap>/</keycap></keycombo>
+for this action.</para></listitem>
+</varlistentry>
+

 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <varlistentry>
 <term><menuchoice>
 <shortcut>


@@ -1754,6 +1890,17 @@ Selects all unselected items and deselects all selected items in the current fol
 <listitem><para><action>Decreases the size of icons in the view.</action></para></listitem>
 </varlistentry>
 
 <listitem><para><action>Decreases the size of icons in the view.</action></para></listitem>
 </varlistentry>
 

+<varlistentry>
+<term><menuchoice>
+<shortcut>
+<keycombo action="simul">&Ctrl;<keycap>0</keycap></keycombo>
+</shortcut>
+<guimenu>View</guimenu>
+<guimenuitem>Zoom Reset</guimenuitem>
+</menuchoice></term>
+<listitem><para><action>Resets the size of icons in the view to default.</action></para></listitem>
+</varlistentry>
+

 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>


@@ -1780,7 +1927,7 @@ or other criteria described in <link linkend="dolphin-view-information">Informat
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>

-<guisubmenu>Additional Information</guisubmenu>
+<guisubmenu>Show Additional Information</guisubmenu>

 </menuchoice></term>
 <listitem><para><action>Displays additional information</action> 
 described in <link linkend="dolphin-view-information">Information in the View</link>.
 </menuchoice></term>
 <listitem><para><action>Displays additional information</action> 
 described in <link linkend="dolphin-view-information">Information in the View</link>.


@@ -1790,7 +1937,7 @@ described in <link linkend="dolphin-view-information">Information in the View</l
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>

-<guimenuitem>Preview</guimenuitem>
+<guimenuitem>Show Previews</guimenuitem>

 </menuchoice></term>
 <listitem><para><action>Displays a symbolic preview of the file contents </action> in the different
 view modes.</para></listitem>
 </menuchoice></term>
 <listitem><para><action>Displays a symbolic preview of the file contents </action> in the different
 view modes.</para></listitem>


@@ -1812,7 +1959,7 @@ current folder grouped by the option selected in <guimenuitem>Sort By</guimenuit
 <keycombo action="simul">&Alt;<keycap>.</keycap></keycombo>
 </shortcut>
 <guimenu>View</guimenu>
 <keycombo action="simul">&Alt;<keycap>.</keycap></keycombo>
 </shortcut>
 <guimenu>View</guimenu>

-<guimenuitem>Hidden Files</guimenuitem>
+<guimenuitem>Show Hidden Files</guimenuitem>

 </menuchoice></term>
 <listitem><para><action>Shows all the hidden files and sub-folders within the current
 folder.</action>There is an alternate shortcut <keycombo action="simul">&Ctrl;<keycap>H</keycap></keycombo>
 </menuchoice></term>
 <listitem><para><action>Shows all the hidden files and sub-folders within the current
 folder.</action>There is an alternate shortcut <keycombo action="simul">&Ctrl;<keycap>H</keycap></keycombo>


@@ -1853,7 +2000,7 @@ folder.</action></para></listitem>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>

-<guisubmenu>Panels</guisubmenu>
+<guisubmenu>Show Panels</guisubmenu>

 </menuchoice></term>
 <listitem><para><action>Enables and disables</action> the different <link linkend="panels">panels</link>:
 <guimenuitem>Places</guimenuitem> (<keycap>F9</keycap>), <guimenuitem>Information</guimenuitem>
 </menuchoice></term>
 <listitem><para><action>Enables and disables</action> the different <link linkend="panels">panels</link>:
 <guimenuitem>Places</guimenuitem> (<keycap>F9</keycap>), <guimenuitem>Information</guimenuitem>


@@ -1899,9 +2046,9 @@ if necessary, and selects the location such that it can be replaced quickly.
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu>

-<guimenuitem>Adjust View Properties...</guimenuitem>
+<guimenuitem>Adjust View Display Style...</guimenuitem>

 </menuchoice></term>
 </menuchoice></term>

-<listitem><para><action>Opens the <link linkend="view-properties-dialog">View Properties
+<listitem><para><action>Opens the <link linkend="view-properties-dialog">View Display Style

 Dialog</link>.</action></para></listitem>
 </varlistentry>
 </variablelist>
 Dialog</link>.</action></para></listitem>
 </varlistentry>
 </variablelist>


@@ -1979,25 +2126,23 @@ be reopened.</action></para></listitem>
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <varlistentry>
 <term><menuchoice>
 <shortcut>

-<keycombo action="simul">&Ctrl;<keycap>I</keycap></keycombo>
+<keycombo action="simul">&Shift;<keycap>F4</keycap></keycombo>

 </shortcut>
 <guimenu>Tools</guimenu>
 </shortcut>
 <guimenu>Tools</guimenu>

-<guimenuitem>Show Filter Bar</guimenuitem>
+<guimenuitem>Open Terminal</guimenuitem>

 </menuchoice></term>
 </menuchoice></term>

-<listitem><para><action>Enables and disables the <link linkend="filter-files">filter bar</link>.</action>
-You can also use the alternate shortcut <keycombo action="simul">&Shift;<keycap>/</keycap></keycombo>
-for this action.</para></listitem>
+<listitem><para><action>Opens &konsole; within the current folder.</action></para></listitem>

 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>

-<keycombo action="simul">&Shift;<keycap>F4</keycap></keycombo>
+<keycombo action="simul">&Ctrl;&Shift;<keycap>F</keycap></keycombo>

 </shortcut>
 <guimenu>Tools</guimenu>
 </shortcut>
 <guimenu>Tools</guimenu>

-<guimenuitem>Open Terminal</guimenuitem>
+<guimenuitem>Open Preferred Search Tool</guimenuitem>

 </menuchoice></term>
 </menuchoice></term>

-<listitem><para><action>Opens &konsole; within the current folder.</action></para></listitem>
+<listitem><para><action>Opens preferred search tool in the current folder.</action></para></listitem>

 </varlistentry>
 
 <varlistentry>
 </varlistentry>
 
 <varlistentry>


@@ -2025,8 +2170,8 @@ connection manually.</action></para></listitem>
 <title>The Settings and Help Menu</title> 
 <para>
 &dolphin; has the common &kde; <guimenu>Settings</guimenu> and <guimenu>Help</guimenu>
 <title>The Settings and Help Menu</title> 
 <para>
 &dolphin; has the common &kde; <guimenu>Settings</guimenu> and <guimenu>Help</guimenu>

-menu items, for more information read the sections about the <ulink url="help:/fundamentals/ui.html#menus-settings"
->Settings Menu</ulink> and <ulink url="help:/fundamentals/ui.html#menus-help">Help Menu</ulink>
+menu items, for more information read the sections about the <ulink url="help:/fundamentals/menus.html#menus-settings"
+>Settings Menu</ulink> and <ulink url="help:/fundamentals/menus.html#menus-help">Help Menu</ulink>

 of the &kde; Fundamentals.
 </para>
 </sect2>
 of the &kde; Fundamentals.
 </para>
 </sect2>


@@ -2076,7 +2221,7 @@ project. If you wish to contribute to the documentation please email the
 <para>
 The official channel for submitting bug reports is via the &kde; bug tracking
 system. The &kde; bug tracker can be found at
 <para>
 The official channel for submitting bug reports is via the &kde; bug tracking
 system. The &kde; bug tracker can be found at

-<ulink url="http://bugs.kde.org">http://bugs.kde.org</ulink>.
+<ulink url="https://bugs.kde.org">https://bugs.kde.org</ulink>.

 </para>
 </answer>
 </qandaentry>
 </para>
 </answer>
 </qandaentry>


@@ -2089,7 +2234,7 @@ system. The &kde; bug tracker can be found at
 <para>
 The official channel for submitting feature requests is via the &kde; bug
 tracking system. The &kde; bug tracker can be found at
 <para>
 The official channel for submitting feature requests is via the &kde; bug
 tracking system. The &kde; bug tracker can be found at

-<ulink url="http://bugs.kde.org">http://bugs.kde.org</ulink>.
+<ulink url="https://bugs.kde.org">https://bugs.kde.org</ulink>.

 </para>
 
 </answer>
 </para>
 
 </answer>