+ //Disconnect then reconnect, since the settings have been changed, the connection requirements may have also.
+ disconnect(this, SIGNAL(clicked(QModelIndex)), m_controller, SLOT(triggerItem(QModelIndex)));
+ disconnect(this, SIGNAL(doubleClicked(QModelIndex)), m_controller, SLOT(triggerItem(QModelIndex)));
+ if (KGlobalSettings::singleClick()) {
+ connect(this, SIGNAL(clicked(QModelIndex)), m_controller, SLOT(triggerItem(QModelIndex)));
+ } else {
+ connect(this, SIGNAL(doubleClicked(QModelIndex)), m_controller, SLOT(triggerItem(QModelIndex)));
+ }
+}
+
+void DolphinDetailsView::updateElasticBandSelection()
+{
+ if (!m_band.show) {
+ return;
+ }
+
+ // Ensure the elastic band itself is up-to-date, in
+ // case we are being called due to e.g. a drag event.
+ updateElasticBand();
+
+ // Clip horizontally to the name column, as some filenames will be
+ // longer than the column. We don't clip vertically as origin
+ // may be above or below the current viewport area.
+ const int nameColumnX = header()->sectionPosition(DolphinModel::Name);
+ const int nameColumnWidth = header()->sectionSize(DolphinModel::Name);
+ QRect selRect = elasticBandRect().normalized();
+ QRect nameColumnArea(nameColumnX, selRect.y(), nameColumnWidth, selRect.height());
+ selRect = nameColumnArea.intersect(selRect).normalized();
+ // Get the last elastic band rectangle, expressed in viewpoint coordinates.
+ const QPoint scrollPos(horizontalScrollBar()->value(), verticalScrollBar()->value());
+ QRect oldSelRect = QRect(m_band.lastSelectionOrigin - scrollPos, m_band.lastSelectionDestination - scrollPos).normalized();
+
+ if (selRect.isNull()) {
+ selectionModel()->select(m_band.originalSelection, QItemSelectionModel::ClearAndSelect);
+ m_band.ignoreOldInfo = true;
+ return;
+ }
+
+ if (!m_band.ignoreOldInfo) {
+ // Do some quick checks to see if we can rule out the need to
+ // update the selection.
+ Q_ASSERT(uniformRowHeights());
+ QModelIndex dummyIndex = model()->index(0, 0);
+ if (!dummyIndex.isValid()) {
+ // No items in the model presumably.
+ return;
+ }
+
+ // If the elastic band does not cover the same rows as before, we'll
+ // need to re-check, and also invalidate the old item distances.
+ const int rowHeight = QTreeView::rowHeight(dummyIndex);
+ const bool coveringSameRows =
+ (selRect.top() / rowHeight == oldSelRect.top() / rowHeight) &&
+ (selRect.bottom() / rowHeight == oldSelRect.bottom() / rowHeight);
+ if (coveringSameRows) {
+ // Covering the same rows, but have we moved far enough horizontally
+ // that we might have (de)selected some other items?
+ const bool itemSelectionChanged =
+ ((selRect.left() > oldSelRect.left()) &&
+ (selRect.left() > m_band.insideNearestLeftEdge)) ||
+ ((selRect.left() < oldSelRect.left()) &&
+ (selRect.left() <= m_band.outsideNearestLeftEdge)) ||
+ ((selRect.right() < oldSelRect.right()) &&
+ (selRect.left() >= m_band.insideNearestRightEdge)) ||
+ ((selRect.right() > oldSelRect.right()) &&
+ (selRect.right() >= m_band.outsideNearestRightEdge));
+
+ if (!itemSelectionChanged) {
+ return;
+ }
+ }
+ }
+ else {
+ // This is the only piece of optimization data that needs to be explicitly
+ // discarded.
+ m_band.lastSelectionOrigin = QPoint();
+ m_band.lastSelectionDestination = QPoint();
+ oldSelRect = selRect;
+ }
+
+ // Do the selection from scratch. Force a update of the horizontal distances info.
+ m_band.insideNearestLeftEdge = nameColumnX + nameColumnWidth + 1;
+ m_band.insideNearestRightEdge = nameColumnX - 1;
+ m_band.outsideNearestLeftEdge = nameColumnX - 1;
+ m_band.outsideNearestRightEdge = nameColumnX + nameColumnWidth + 1;
+
+ // Include the old selection rect as well, so we can deselect
+ // items that were inside it but not in the new selRect.
+ const QRect boundingRect = selRect.united(oldSelRect).normalized();
+ if (boundingRect.isNull()) {
+ return;
+ }
+
+ // Get the index of the item in this row in the name column.
+ // TODO - would this still work if the columns could be re-ordered?
+ QModelIndex startIndex = QTreeView::indexAt(boundingRect.topLeft());
+ if (startIndex.parent().isValid()) {
+ startIndex = startIndex.parent().child(startIndex.row(), KDirModel::Name);
+ } else {
+ startIndex = model()->index(startIndex.row(), KDirModel::Name);
+ }
+ if (!startIndex.isValid()) {
+ selectionModel()->select(m_band.originalSelection, QItemSelectionModel::ClearAndSelect);
+ m_band.ignoreOldInfo = true;
+ return;
+ }
+
+ // Go through all indexes between the top and bottom of boundingRect, and
+ // update the selection.
+ const int verticalCutoff = boundingRect.bottom();
+ QModelIndex currIndex = startIndex;
+ QModelIndex lastIndex;
+ bool allItemsInBoundDone = false;
+
+ // Calling selectionModel()->select(...) for each item that needs to be
+ // toggled is slow as each call emits selectionChanged(...) so store them
+ // and do the selection toggle in one batch.
+ QItemSelection itemsToToggle;
+ // QItemSelection's deal with continuous ranges of indexes better than
+ // single indexes, so try to portion items that need to be toggled into ranges.
+ bool formingToggleIndexRange = false;
+ QModelIndex toggleIndexRangeBegin = QModelIndex();
+
+ do {
+ QRect currIndexRect = nameColumnRect(currIndex);
+
+ // Update some optimization info as we go.
+ const int cr = currIndexRect.right();
+ const int cl = currIndexRect.left();
+ const int sl = selRect.left();
+ const int sr = selRect.right();
+ // "The right edge of the name is outside of the rect but nearer than m_outsideNearestLeft", etc
+ if ((cr < sl && cr > m_band.outsideNearestLeftEdge)) {
+ m_band.outsideNearestLeftEdge = cr;
+ }
+ if ((cl > sr && cl < m_band.outsideNearestRightEdge)) {
+ m_band.outsideNearestRightEdge = cl;
+ }
+ if ((cl >= sl && cl <= sr && cl > m_band.insideNearestRightEdge)) {
+ m_band.insideNearestRightEdge = cl;
+ }
+ if ((cr >= sl && cr <= sr && cr < m_band.insideNearestLeftEdge)) {
+ m_band.insideNearestLeftEdge = cr;
+ }
+
+ bool currentlySelected = selectionModel()->isSelected(currIndex);
+ bool originallySelected = m_band.originalSelection.contains(currIndex);
+ bool intersectsSelectedRect = currIndexRect.intersects(selRect);
+ bool shouldBeSelected = (intersectsSelectedRect && !originallySelected) || (!intersectsSelectedRect && originallySelected);
+ bool needToToggleItem = (currentlySelected && !shouldBeSelected) || (!currentlySelected && shouldBeSelected);
+ if (needToToggleItem && !formingToggleIndexRange) {
+ toggleIndexRangeBegin = currIndex;
+ formingToggleIndexRange = true;
+ }
+
+ // NOTE: indexBelow actually walks up and down expanded trees for us.
+ QModelIndex nextIndex = indexBelow(currIndex);
+ allItemsInBoundDone = !nextIndex.isValid() || currIndexRect.top() > verticalCutoff;
+
+ const bool commitToggleIndexRange = formingToggleIndexRange &&
+ (!needToToggleItem ||
+ allItemsInBoundDone ||
+ currIndex.parent() != toggleIndexRangeBegin.parent());
+ if (commitToggleIndexRange) {
+ formingToggleIndexRange = false;
+ // If this is the last item in the bounds and it is also the beginning of a range,
+ // don't toggle lastIndex - it will already have been dealt with.
+ if (!allItemsInBoundDone || toggleIndexRangeBegin != currIndex) {
+ itemsToToggle.select(toggleIndexRangeBegin, lastIndex);
+ }
+ // Need to start a new range immediately with currIndex?
+ if (needToToggleItem) {
+ toggleIndexRangeBegin = currIndex;
+ formingToggleIndexRange = true;
+ }
+ if (allItemsInBoundDone && needToToggleItem) {
+ // Toggle the very last item in the bounds.
+ itemsToToggle.select(currIndex, currIndex);
+ }
+ }
+
+ // next item
+ lastIndex = currIndex;
+ currIndex = nextIndex;
+ } while (!allItemsInBoundDone);
+
+ selectionModel()->select(itemsToToggle, QItemSelectionModel::Toggle);
+
+ m_band.lastSelectionOrigin = m_band.origin;
+ m_band.lastSelectionDestination = m_band.destination;
+ m_band.ignoreOldInfo = false;
+}
+
+void DolphinDetailsView::setFoldersExpandable(bool expandable)
+{
+ if (!expandable) {
+ // collapse all expanded folders, as QTreeView::setItemsExpandable(false)
+ // does not do this task
+ const int rowCount = model()->rowCount();
+ for (int row = 0; row < rowCount; ++row) {
+ setExpanded(model()->index(row, 0), false);
+ }
+ }
+ DetailsModeSettings* settings = DolphinSettings::instance().detailsModeSettings();
+ settings->setExpandableFolders(expandable);
+ setRootIsDecorated(expandable);
+ setItemsExpandable(expandable);
projects / dolphin.git / blobdiff